Copper Cap And L-Type Termial For Fast Fuse

Stamping parts of Copper Cap and L-Type Termial for Fast Fuse have better interchangeability. Stamping processing stability is better, the same batch of stamping parts. They can be used interchangeably without affecting assembly and product performance.

 Since the stamping parts of Fuse Terminal Contact are made of sheet materials, its surface quality is good, which provides convenient conditions for subsequent surface treatment processes (such as electroplating and painting).

Stamping Fuse Link Contact can obtain parts with high strength, high rigidity and light weight.

The cost of stamping parts Fuse End Blade Ferrules produced in batches with molds is low.

Stamping Fuse Fuse End Tag can produce parts with complex shapes that are difficult to be processed by other metal processing methods.

Welding performance of copper stamping parts Fuse End Cap and Contact

1. Strong thermal conductivity, Fuse Copper Contact Knife Cap has high thermal conductivity, and requires a high-power heat source; preheating the weldment can be used for welding End Cap and Contact.

2. The fluidity is large, and the molten copper liquid has good fluidity, and can only be welded in the flat welding position. If one-side butt welding is to be performed in a spatial position, a backing plate must be added to ensure penetration and obtain good forming.

Our production lines including custom die, CNC punch machines, CNC turret punch machines, CNC bending machines, CNC lathes etc. which can meet the needs of rapid proofing and little batch orders.The ABB robot laser welding for automatic welding.Precisions punching machines and the tunnel oven for production of various kinds of fuse contact welding components.

QUALITY GUARANTEE

Our end caps and fuse terminals comply with the highest quality requirements as stipulated in ISO9001, IATF16949, SGS guidelines,RoHS directives and our systemic quality control.

Step1:Packed these caps electrical terminal in PP bags and sealed.

Step2:Put these copper caps in standard carton box.

Step3:Paste right label on the top right corner of the box.

Step4:Palleted and wraped with moisture proof film.

Fuse caps packaged as delivered can be stored for one year from the date indicated on the packing label under the following conditions:

1）Temperature:-15 °C- +30°C (no condensation) 

2）Humidity :85% RH or less

3）Not exposed to corrosive gas or sea breeze 

4）No visible dust 

5) Not exposed to direct sunlight 

6) Load:No application of load that may cause deformation or degradation of the product.

Tag populer: Tutup Tembaga dan Termial Tipe L untuk Fuse Fuse, China, Produsen, Pemasok, Pabrik